SeamFil – Laminate Repair Standard Color 1oz Tube

$5.45

Clear
SKU: SEAMFIL-STANDARD1 Category:

Description

The “ORIGINAL” laminate repair solution. This user friendly product will quickly and easily fix damage or fill seams on your laminate counter surface. Repair nicks, fill seams and make gouges all but disappear with this one-part system. SeamFil laminate repair bonds mechanically to the substrate of laminate and dries hard, becoming a permanent part of the laminate surface. SeamFil laminate repair also resists moisture, detergents, and other household products as effectively as the original laminate. Typical applications for this product are filling standard joints, cracks, chips and other imperfections where the dark substrate is visible. Properly used, custom colored SeamFil laminate repair will hide defects beautifully for the life of the counter.

  • SeamFil laminate repair is available in 20 standard colors, clear gloss and retarder
  • SeamFil laminate repair color matching Guides are available at no charge with mixing proportions for Formica, Nevamar, Pionite, and Wilsonart colors. Special SeamFil Laminate Repair Colors are exact matches to current line Formica, Nevamar, Pionite and Wilsonart laminate colors. Custom matches are for laminate types that are not current line and forwarded samples.
  • For hi-gloss surfaces, add SeamFil Clear Gloss to the SeamFil color you purchased before applying. Or, apply the Clear Gloss over the SeamFil after the repair has been made and the SeamFil is completely dry.
  • If purchasing SeamFil, SF-99 Solvent is strongly recommended for preparation of the laminate and clean-up following application. Other solvents have been known to cause crazing of the material.
  • SeamFil is a single part, solvent based repair system for high pressure laminated (HPL) surfaces. It will cure in approximately one hour, but we recommend 24 hours for total cure.
  • SF-99 Solvent is the ONLY recommended solvent for use with SeamFil.
  • One (one ounce tube of SeamFil) will approximately fill an 8 foot Seam of Counter with an 1/8″ bead. If the seam is wider than 1/16″ (but should never be larger than 1/8″) a second application will probably be necessary. It can be used to fill an area that is no longer than 1/4″ in diameter.
  •  SeamFil will not freeze because of the solvent.
  • The shelf-life of SeamFil is 1 year if opened and correctly capped, two years, if unopened.
  • SeamFil can withstand heat up to 120 °
  • SeamFil’s VOC is 48 (529 g voc / L) wet measurement and SF-99 Solvent is 100% VOC and will attack non-laminate surfaces like, finished wood, PVC, etc.
  • SeamFil dries to a matte finish. To obtain a Glossy Finish, 943 Clear Gloss should be added.
  • To increase the cure time of SeamFil, 944 SeamFil Retarder can be added to the mix.
  • SeamFil is a one-part system that is a solid color. It does not have any variation of color within the tube for patterns or woodgrain effects.
  •  SeamFil is NOT recommended for use on Solid Surface materials. Our ColorFlex or ColorFlex II product is used for Solid Surfaces.

SeamFil Standard Colors

901 WHITE
902 GRAY
903 DARK GRAY
904 TAN
913 BROWN
914 BLACK
918 MAHOGANY
919 PINK
931 MAPLE
933 TEAK
934 GRAY WALNUT
935 BIRCH
936 PRIMARY YELLOW
937 PRIMARY RED
939 OLIVE
940 ORANGE
941 ALMOND
942 BUTCHER BLOCK
943 CLEAR GLOSS
945 SPECTRUM GREEN
946 SPECTRUM BLUE

 

You may also like…