FloorFil Retarder 944 1oz. Tube


SKU: FLOORFIL-RETARDER-944-1oz Category:


  • FloorFil Retarder is formulated to extend the curing time of FloorFil. Add up to 40% Retarder for as much as 8 minutes of additional working time!
  • Recommended when mixing colors.
  • If purchasing FloorFil, FF-99 Solvent is strongly recommended for preparation of the laminate and clean-up following application. Other solvents have been known to cause crazing of the material.


  • FloorFil is a single part, solvent based repair system for high pressure laminated floors. It will cure in approximately one hour, but we recommend 24 hours for total cure.
  • FF-99 Solvent is the ONLY recommended solvent for use with FloorFil.
  • One (one ounce tube of FloorFil) will approximately fill an 8 foot Seam of flooring with an 1/8″ bead. If the seam is wider than 1/16″ (but should never be larger than 1/8″) second application will probably be necessary. It can be used to fill an area that is no longer than 1/4″ in diameter.
  • FloorFil will not freeze because of the solvent.
  • The shelf-life of FloorFil is one year if opened and correctly capped, two years, if unopened.
  • FloorFil can withstand heat up to 120 ┬░
  • FloorFil’s VOC is 48 (529 g voc / L) wet measurement and FF-99 Solvent is 100% VOC and will attack non-laminate surfaces like, finished wood, PVC, etc.
  • FloorFil dries to a matte finish. To obtain a Glossy Finish, request Clear Gloss be added.
  • To increase the cure time of FloorFil, FloorFil Retarder can be added to the mix.
  • FloorFil will cure rigid so it should not be applied in seams in heavy traffic areas where the flooring requires flexibility.

You may also like…

  • Putty Knife

    Putty Knife

    Add to cart
  • FF-99 Solvent 1/2 Pint Can

    Add to cart