SeamFil Questions
SeamFil is a single part, solvent based repair system for high pressure laminated surfaces.
Please click here if this helped you.
10 people found this helpful.
Permalink
SeamFil will cure in approximately one hour, but we recommend 24 hours for total cure.
Please click here if this helped you.
7 people found this helpful.
Permalink
We suggest only the use of SF99 solvent with SeamFil, it is specially formulated for use with SeamFil.
Please click here if this helped you.
4 people found this helpful.
Permalink
One (one ounce tube of SeamFil) will approximately fill an 8 foot seam of counter with an 1/8″ bead. If the seam is wider that 1/16″ (but should never be larger that 1/8″) a second application will probably be necessary. It can be used to fill an area that is no longer than 1/4″ in diameter.
Please click here if this helped you.
5 people found this helpful.
Permalink
SeamFil will not freeze.
Please click here if this helped you.
1 person found this helpful.
Permalink
SeamFil has a shelf life of 1 year if opened and correctly capped, two years, if unopened.
Please click here if this helped you.
4 people found this helpful.
Permalink
SeamFil can withstand heat up to 120 degrees.
Please click here if this helped you.
3 people found this helpful.
Permalink
SeamFil dries to a matte finish. To obtain a Glossy Finish, 943 Clear Gloss should be added.
Please click here if this helped you.
5 people found this helpful.
Permalink
To increase the cure time of SeamFil, 944 SeamFil Retarder can be added to the mix.
Please click here if this helped you.
0 people found this helpful.
Permalink
We recommend repairing damage no larger than ¼”. SeamFil will shrink and can crack when working on areas that are too large.
Please click here if this helped you.
8 people found this helpful.
Permalink
SeamFil bonds to the substrate of the laminate (the wood underneath the laminate) and will not repair large burn marks, however it can be used to fill in small burnt areas where the damage is cleaned correctly.
Please click here if this helped you.
7 people found this helpful.
Permalink
SF-99 is a special proprietary blend of solvents that was designed for specific use on laminates and with SeamFil. Other solvents can cause what’s called crazing which is dulling of the surface of your laminate or cracking. We highly recommend only using SF-99 while doing your repair.
Please click here if this helped you.
37 people found this helpful.
Permalink
Seamfil is always a solid color, as there is no way to replicate a multi-colored flecks or patterns with the Seamfil prodcut. When you order a Special or Custom Color Seamfil to match a laminate that has color variations, the Seamfil will be mixed to match to one of the main colors in the laminate.
Please click here if this helped you.
8 people found this helpful.
Permalink
