Skip to content

Celebrating over 60 years of successfully helping customers repair nicks, seams & gouges in laminate countertops!

FloorFil – Laminate Floor Repair Standard Color 1oz. Tube

$10.40

Clear
SKU: FLOORFIL-STANDARD-1oz Category:

Description

Laminate floor repair / filler, compatible with all High Pressure Laminate (HPL) flooring.  FloorFil HPL colored laminate floor repair paste/filler, cures to a hard, inert plastic and will resist household detergents used for floor cleaning. FloorFil laminate floor repair products can be color matched to any HPL floor solid, color or pattern. Typical applications for this product are repairing surface damage caused by tools or any heavy, sharp object accidentally dropped on the floor surface. FloorFil can also be used to successfully repair damaged edges and broken corners.

  • FloorFil Standard colors are White, Brown, Black, Mahogany, Almond and Oak. Please note that the colors displayed on the Mixing Guide may not be an accurate representation.
  • If purchasing FloorFil, FF-99 Solvent is strongly recommended for preparation of the laminate and clean-up following application. Other solvents have been known to cause crazing of the material.
  • FloorFil is a single part, solvent based repair system for high pressure laminated floors. It will cure in approximately one hour, but we recommend 24 hours for total cure.
  • FF-99 Solvent is the ONLY recommended solvent for use with FloorFil.
  • One (one ounce tube of FloorFil) will approximately fill an 8 foot Seam of flooring with an 1/8″ bead. If the seam is wider than 1/16″ (but should never be larger than 1/8″) second application will probably be necessary. It can be used to fill an area that is no longer than 1/4″ in diameter.
  • FloorFil will not freeze because of the solvent.
  • The shelf-life of FloorFil is one year if opened and correctly capped, two years, if unopened.
  • FloorFil can withstand heat up to 120 °
  • FloorFil’s VOC is 48 (529 g voc / L) wet measurement and FF-99 Solvent is 100% VOC and will attack non-laminate surfaces like, finished wood, PVC, etc.
  • FloorFil dries to a matte finish. To obtain a Glossy Finish, request Clear Gloss be added.
  • To increase the cure time of FloorFil, FloorFil Retarder can be added to the mix.
  • FloorFil will cure rigid so it should not be applied in seams in heavy traffic areas where the flooring requires flexibility.

Almond
Black
Brown
Mahogany
Oak
White

 
Note: The standard colors shown may vary from actual product color due to screen resolutions being different between devices and computers.

You may also like…

Return to Top